Search     or:     and:
 LINUX 
 Language 
 Kernel 
 Package 
 Book 
 Test 
 OS 
 Forum 
iakovlev.org

Linked List
Problems

By Nick Parlante Copyright �1998-2002, Nick Parlante

Abstract

This document reviews basic linked list code techniques and then works through 18 linked list problems covering a wide range of difficulty. Most obviously, these problems are a way to learn about linked lists. More importantly, these problems are a way to develop your ability with complex pointer algorithms. Even though modern languages and tools have made linked lists pretty unimportant for day-to-day programming, the skills for complex pointer algorithms are very important, and linked lists are an excellent way to develop those skills.

The problems use the C language syntax, so they require a basic understanding of C and its pointer syntax. The emphasis is on the important concepts of pointer manipulation and linked list algorithms rather than the features of the C language.

For some of the problems we present multiple solutions, such as iteration vs. recursion, dummy node vs. local reference. The specific problems are, in rough order of difficulty: Count, GetNth, DeleteList, Pop, InsertNth, SortedInsert, InsertSort, Append, FrontBackSplit, RemoveDuplicates, MoveNode, AlternatingSplit, ShuffleMerge,

SortedMerge, SortedIntersect, Reverse, and RecursiveReverse.
Contents Section 1 � Review of basic linked list code techniques Section 2 � 18 list problems in increasing order of difficulty Section 3 � Solutions to all the problems 3 10 20

This is document #105, Linked List Problems, in the Stanford CS Education Library. This and other free educational materials are available at http://cslibrary.stanford.edu/. This document is free to be used, reproduced, or sold so long as this notice is clearly reproduced at its beginning.

Related CS Education Library Documents

Related Stanford CS Education library documents...

  • Linked List Basics (http://cslibrary.stanford.edu/103/) Explains all the basic issues and techniques for building linked lists.
  • Pointers and Memory (http://cslibrary.stanford.edu/102/) Explains how pointers and memory work in C and other languages. Starts with the very basics, and extends through advanced topics such as reference parameters and heap management.
  • Binary Trees (http://cslibrary.stanford.edu/110/)Introduction to binary trees
  • Essential C (http://cslibrary.stanford.edu/101/)Explains the basic features of the C programming language.
  • The Great Tree List Problem (http://cslibrary.stanford.edu/109/)Presents the greatest recursive pointer problem ever devised.

Why Linked Lists Are Great To Study

Linked lists hold a special place in the hearts of many programmers. Linked lists are great to study because...

  • Nice Domain The linked list structure itself is simple. Many linked list operations such as "reverse a list" or "delete a list" are easy to describe and understand since they build on the simple purpose and structure of the linked list itself.
  • Complex Algorithm Even though linked lists are simple, the algorithms that operate on them can be as complex and beautiful as you want (See problem #18). It's easy to find linked list algorithms that are complex, and pointer intensive.
  • Pointer Intensive Linked list problems are really about pointers. The linked list structure itself is obviously pointer intensive. Furthermore, linked list algorithms often break and re-weave the pointers in a linked list as they go. Linked lists really test your understanding of pointers.
  • Visualization Visualization is an important skill in programming and design. Ideally, a programmer can visualize the state of memory to help think through the solution. Even the most abstract languages such as Java and Perl have layered, reference based data structures that require visualization. Linked lists have a natural visual structure for practicing this sort of thinking. It's easy to draw the state of a linked list and use that drawing to think through the code.

Not to appeal to your mercenary side, but for all of the above reasons, linked list problems are often used as interview and exam questions. They are short to state, and have complex, pointer intensive solutions. No one really cares if you can build linked lists, but they do want to see if you have programming agility for complex algorithms and pointer manipulation. Linked lists are the perfect source of such problems.

How To Use This Document

Try not to use these problems passively. Take some time to try to solveeach problem. Even if you do not succeed, you will think through the right issues in the attempt, and looking at the given solution will make more sense. Use drawings to think about the problems and work through the solutions. Linked lists are well-suited for memory drawings, so these problems are an excellent opportunity to develop your visualization skill. The problems in this document use regular linked lists, without simplifcations like dummy headers.

Dedication

This Jan-2002 revision includes many small edits. The first major release was Jan 17, 1999. Thanks to Negar Shamma for her many corrections. This document is distributed for the benefit and education of all. Thanks to the support of Eric Roberts and Stanford University. That someone seeking education should have the opportunity to find it. May you learn from it in the spirit of goodwill in which it is given. Best Regards, Nick Parlante -- nick.parlante@cs.stanford.edu

Section 1 � Linked List Review

This section is a quick review of the concepts used in these linked list problems. For more detailed coverage, see Link List Basics (http://cslibrary.stanford.edu/103/) where all of this material is explained in much more detail.

Linked List Ground Rules

All of the linked list code in this document uses the "classic" singly linked list structure: A single head pointer points to the first node in the list. Each node contains a single .nextpointer to the next node. The .nextpointer of the last node is NULL. The empty list is represented by a NULL head pointer. All of the nodes are allocated in the heap.

For a few of the problems, the solutions present the temporary "dummy node" variation (see below), but most of the code deals with linked lists in their plain form. In the text, brackets {} are used to describe lists � the list containing the numbers 1, 2, and 3 is written as {1, 2, 3}. The node type used is...

struct node {

int data;

struct node* next;
};

To keep thing ssimple, we will not introduce any intermediate typedefs. All pointers to nodes are declared simply as struct node*. Pointers to pointers to nodes are declared as struct node**. Such pointers to pointers are often called "reference pointers".

Basic Utility Functions

In a few places, the text assumes the existence of the following basic utility functions...

  • int Length(struct node* head);
    Returns the number of nodes in the list.
  • struct node* BuildOneTwoThree(); Allocates and returns the list {1, 2, 3}. Used by some of the example code to build lists to work on.
  • void Push(struct node** headRef, int newData); Given an intand a reference to the head pointer (i.e. a struct node**pointer to the head pointer), add a new node at the head of the list with the standard 3-step-link-in: create the new node, set its .nextto point to the current head, and finally change the head to point to the new node. (If you are not sure of how this function works, the first few problems may be helpful warm-ups.)

Use of the Basic Utility Functions

This sample code demonstrates the basic utility functions being used. Their implementations are also given in the appendix at the end of the document.

void BasicsCaller() {
struct node* head;
int len;

head = BuildOneTwoThree(); // Start with {1, 2, 3}

Push(&head, 13); // Push 13 on the front, yielding {13, 1, 2, 3} // (The '&' is because head is passed // as a reference pointer.)
Push(&(head->next), 42); // Push 42 into the second position // yielding {13, 42, 1, 2, 3} // Demonstrates a use of '&' on // the .next field of a node. // (See technique #2 below.)
} len = Length(head); // Computes that the length is 5.

If these basic functions do not make sense to you, you can (a) go see Linked List Basics (http://cslibrary.stanford.edu/103/) which explains the basics of linked lists in detail, or

(b) do the first few problems, but avoid the intermediate and advanced ones.

Linked List Code Techniques

The following list presents the most common techniques you may want to use in solving the linked list problems. The first few are basic. The last few are only necessary for the more advanced problems.

1. Iterate Down a List

A very frequent technique in linked list code is to iterate a pointer over all the nodes in a list. Traditionally, this is written as a whileloop. The head pointer is copied into a local variable currentwhich then iterates down the list. Test for the end of the list with current!=NULL. Advance the pointer with current=current->next.

// Return the number of nodes in a list (while-loop version)

int Length(struct node* head) {

int count = 0;

struct node* current = head;

while (current != NULL) {

count++;

current = current->next;

}

return(count);
}

Alternately, some people prefer to write the loop as a forwhich makes the initialization, test, and pointer advance more centralized, and so harder to omit...

for (current = head; current != NULL; current = current->next) {

2. Changing a Pointer Using a Reference Pointer

Many list functions need to change the caller's head pointer. In C++, you can just declare the pointer parameter as an & argument, and the compiler takes care of the details. To do this in the C language, pass a pointer to the head pointer. Such a pointer to a pointer is sometimes called a "reference pointer". The main steps for this technique are...

  • Design the function to take a pointer to the head pointer. This is thestandard technique in C � pass a pointer to the "value of interest" thatneeds to be changed. To change a struct node*, pass a structnode**.
  • Use '&' in the caller to compute and pass a pointer to the value of interest.
  • Use '*' on the parameter in the callee function to access and change the
    value of interest.

The following simple function sets a head pointer to NULL by using a reference parameter....

// Change the passed in head pointer to be NULL
// Uses a reference pointer to access the caller's memory
void ChangeToNull(struct node** headRef) { // Takes a pointer to

// the value of interest

*headRef = NULL; // use '*' to access the value of interest
}

void ChangeCaller() {
struct node* head1;
struct node* head2;

ChangeToNull(&head1); // use '&' to compute and pass a pointer toChangeToNull(&head2); // the value of interest// head1 and head2 are NULL at this point

}

Here is a drawing showing how the headRefpointer in ChangeToNull() points back to the variable in the caller...

Stack

ChangeCaller()

ChangeToNull(&head1)

Many of the functions in this document use reference pointer parameters. See the use of Push() above and its implementation in the appendix for another example of reference pointers. See problem #8 and its solution for a complete example with drawings. For more detailed explanations, see the resources listed on page 1.

3. Build � At Head With Push()

The easiest way to build up a list is by adding nodes at its "head end" with Push(). The code is short and it runs fast � lists naturally support operations at their head end. The disadvantage is that the elements will appear in the list in the reverse order that they are added. If you don't care about order, then the head end is the best.

struct node* AddAtHead() {
struct node* head = NULL;
int i;

for (i=1; i<6; i++) {
Push(&head, i);
}

// head == {5, 4, 3, 2, 1};
return(head);
}

4. Build � With Tail Pointer

What about adding nodes at the "tail end" of the list? Adding a node at the tail of a list most often involves locating the last node in the list, and then changing its .nextfield from NULL to point to the new node, such as the tailvariable in the following example of adding a "3" node to the end of the list {1, 2}...

Stack

head

tail
newNode

This is just a special case of the general rule: to insert or delete a node inside a list, you need a pointer to the node just before that position, so you can change its .nextfield. Many list problems include the sub-problem of advancing a pointer to the node before the point of insertion or deletion. The one exception is if the operation falls on the first node in the list � in that case the head pointer itself must be changed. The following examples show the various ways code can handle the single head case and all the interior cases...

5. Build � Special Case + Tail Pointer

Consider the problem of building up the list {1, 2, 3, 4, 5} by appending the nodes to the tail end. The difficulty is that the very first node must be added at the head pointer, but all the other nodes are inserted after the last node using a tail pointer. The simplest way to deal with both cases is to just have two separate cases in the code. Special case code first adds the head node {1}. Then there is a separate loop that uses a tail pointer to add all the other nodes. The tail pointer is kept pointing at the last node, and each new node is added at tail->next. The only "problem" with this solution is that writing separate special case code for the first node is a little unsatisfying. Nonetheless, this approach is a solid one for production code � it is simple and runs fast.

struct node* BuildWithSpecialCase() {
struct node* head = NULL;
struct node* tail;
int i;

// Deal with the head node here, and set the tail pointer
Push(&head, 1);
tail = head;

// Do all the other nodes using 'tail'

for (i=2; i<6; i++) {Push(&(tail->next), i); // add node at tail->nexttail = tail->next; // advance tail to point to last node

}

return(head); // head == {1, 2, 3, 4, 5};
}

6. Build � Temporary Dummy Node

This is a slightly unusual technique that can be used to shorten the code: Use a temporary dummy node at the head of the list during the computation. The trick is that with the dummy, every node appears to be added after the .nextfield of some other node. That way the code for the first node is the same as for the other nodes. The tail pointer plays the same role as in the previous example. The difference is that now it also handles the first node as well.

struct node* BuildWithDummyNode() {
struct node dummy; // Dummy node is temporarily the first node
struct node* tail = &dummy; // Start the tail at the dummy.

// Build the list on dummy.next (aka tail->next)
int i;

dummy.next = NULL;

for (i=1; i<6; i++) {
Push(&(tail->next), i);
tail = tail->next;

}

// The real result list is now in dummy.next
// dummy.next == {1, 2, 3, 4, 5};
return(dummy.next);

}

Some linked list implementations keep the dummy node as a permanent part of the list. For this "permanent dummy" strategy, the empty list is not represented by a NULL pointer. Instead, every list has a heap allocated dummy node at its head. Algorithms skip over the dummy node for all operations. That way the dummy node is always present to provide the above sort of convenience in the code. I prefer the temporary strategy shown here, but it is a little peculiar since the temporary dummy node is allocated in the stack, while all the other nodes are allocated in the heap. For production code, I do not use either type of dummy node. The code should just cope with the head node boundary cases.

7. Build � Local References

Finally, here is a tricky way to unify all the node cases without using a dummy node at all. For this technique, we use a local "reference pointer" which always points to the last pointer in the list instead of to the last node. All additions to the list are made by following the reference pointer. The reference pointer starts off pointing to the head pointer. Later, it points to the .nextfield inside the last node in the list. (A detailed explanation follows.)

struct node* BuildWithLocalRef() {
struct node* head = NULL;
struct node** lastPtrRef= &head; // Start out pointing to the head pointer
int i;

for (i=1; i<6; i++) {Push(lastPtrRef, i); // Add node at the last pointer in the listlastPtrRef= &((*lastPtrRef)->next); // Advance to point to the

// new last pointer
}

// head == {1, 2, 3, 4, 5};
return(head);
}

This technique is short, but the inside of the loop is scary. This technique is rarely used, but it's a good way to see if you really understand pointers. Here's how it works...

1) At the top of the loop, lastPtrRefpoints to the last pointer in the list.Initially it points to the head pointer itself. Later it points to the .nextfield inside the last node in the list.

2) Push(lastPtrRef, i); adds a new node at the last pointer. Thenew node becomes the last node in the list.

3) lastPtrRef= &((*lastPtrRef)->next);Advance thelastPtrRefto now point to the .nextfield inside the new last node

that .nextfield is now the last pointer in the list.

Here is a drawing showing the state of memory for the above code just before the third node is added. The previous values of lastPtrRefare shown in gray...

Stack

LocalRef()
head

lastPtrRef

This technique is never required to solve a linked list problem, but it will be one of the alternative solutions presented for some of the advanced problems. The code is shorter this way, but the performance is probably not any better.

Unusual Techniques

Both the temporary-stack-dummy and the local-reference-pointer techniques are a little unusual. They are cute, and they let us play around with yet another variantion in pointer intensive code. They use memory in unusual ways, so they are a nice way to see if you really understand what's going on. However, I probably would not use them in production code.

Section 2 �
Linked List Problems

Here are 18 linked list problems arranged in order of difficulty. The first few are quite basic and the last few are quite advanced. Each problem starts with a basic definition of what needs to be accomplished. Many of the problems also include hints or drawings to get you started. The solutions to all the problems are in the next section.

It's easy to just passively sweep your eyes over the solution � verifying its existence without lettings its details touch your brain. To get the most benefit from these problems, you need to make an effort to think them through. Whether or not you solve the problem, you will be thinking through the right issues, and the given solution will make more sense.

Great programmers can visualize data structures to see how the code and memory will interact. Linked lists are well suited to that sort of visual thinking. Use these problems to develop your visualization skill. Make memory drawings to trace through the execution of code. Use drawings of the pre- and post-conditions of a problem to start thinking about a solution.

"The will to win means nothing without the will to prepare." - Juma Ikangaa, marathoner (also attributed to Bobby Knight)

1 � Count()

Write a Count() function that counts the number of times a given int occurs in a list. The code for this has the classic list traversal structure as demonstrated in Length().

void CountTest() {
List myList = BuildOneTwoThree(); // build {1, 2, 3}

int count = Count(myList, 2); // returns 1 since there's 1 '2' in the list
}

/*
Given a list and an int, return the number of times that int occurs
in the list.

*/
int Count(struct node* head, int searchFor) {
// Your code

2 � GetNth()

Write a GetNth() function that takes a linked list and an integer index and returns the data value stored in the node at that index position. GetNth() uses the C numbering convention that the first node is index 0, the second is index 1, ... and so on. So for the list {42, 13, 666} GetNth() with index 1 should return 13. The index should be in the range [0..length1]. If it is not, GetNth() should assert() fail (or you could implement some other error

case strategy).
void GetNthTest() {
struct node* myList = BuildOneTwoThree(); // build {1, 2, 3}
int lastNode = GetNth(myList, 2); // returns the value 3
}

Essentially, GetNth() is similar to an array[i]operation � the client can ask for elements by index number. However, GetNth() no a list is much slower than [ ] on an array. The advantage of the linked list is its much more flexible memory management � we can Push() at any time to add more elements and the memory is allocated as needed.

// Given a list and an index, return the data
// in the nth node of the list. The nodes are numbered from 0.
// Assert fails if the index is invalid (outside 0..lengh-1).
int GetNth(struct node* head, int index) {
// Your code

3 � DeleteList()

Write a function DeleteList() that takes a list, deallocates all of its memory and sets its head pointer to NULL (the empty list).

void DeleteListTest() {
struct node* myList = BuildOneTwoThree(); // build {1, 2, 3}

DeleteList(&myList); // deletes the three nodes and sets myList to NULL
}

Post DeleteList() Memory Drawing

The following drawing shows the state of memory after DeleteList() executes in the above sample. Overwritten pointers are shown in gray and deallocated heap memory has an 'X' through it. Essentially DeleteList() just needs to call free() once for each node and set the head pointer to NULL.

Stack

DeleteListTest()
myList

myList is overwritten with the value NULL.

Heap

The three heap blocks are deallocated by calls to free(). Their memory will appear to be intact for a while, but the memory should not be accessed.

DeleteList()

The DeleteList() implementation will need to use a reference parameter just like Push() so that it can change the caller's memory (myList in the above sample). The implementation also needs to be careful not to access the .next field in each node after the node has been deallocated.

void DeleteList(struct node** headRef) {
// Your code

4 � Pop()

Write a Pop() function that is the inverse of Push(). Pop() takes a non-empty list, deletes the head node, and returns the head node's data. If all you ever used were Push() and Pop(), then our linked list would really look like a stack. However, we provide more general functions like GetNth() which what make our linked list more than just a stack. Pop() should assert() fail if there is not a node to pop. Here's some sample code which calls Pop()....

void PopTest() {

struct node* head = BuildOneTwoThree(); // build {1, 2, 3}

int a = Pop(&head); // deletes "1" node and returns 1

int b = Pop(&head); // deletes "2" node and returns 2

int c = Pop(&head); // deletes "3" node and returns 3

int len = Length(head); // the list is now empty, so len == 0
}

Pop() Unlink

Pop() is a bit tricky. Pop() needs to unlink the front node from the list and deallocate it with a call to free(). Pop() needs to use a reference parameter like Push() so that it can change the caller's head pointer. A good first step to writing Pop() properly is making the memory drawing for what Pop() should do. Below is a drawing showing a Pop() of the first node of a list. The process is basically the reverse of the 3-Step-Link-In used by Push() (would that be "Ni Knil Pets-3"?). The overwritten pointer value is shown in gray, and the deallocated heap memory has a big 'X' drawn on it...

Stack

PopTest()
head

The head pointer advances to refer to the node after the unlinked one.

Heap

The unlinked node is deallocated by a call to free(). Ironically, the unlinked node itself is not changed immediately. It is no longer appears in the list just because the head pointer no longer points to it.

Pop()

/*
The opposite of Push(). Takes a non-empty list
and removes the front node, and returns the data
which was in that node.

*/
int Pop(struct node** headRef) {
// your code...

5 � InsertNth()

A more difficult problem is to write a function InsertNth() which can insert a new node at any index within a list. Push() is similar, but can only insert a node at the head end of the list (index 0). The caller may specify any index in the range [0..length], and the new node should be inserted so as to be at that index.

void InsertNthTest() {
struct node* head = NULL; // start with the empty list

InsertNth(&head, 0, 13); // build {13)InsertNth(&head, 1, 42); // build {13, 42}InsertNth(&head, 1, 5); // build {13, 5, 42}

DeleteList(&head); // clean up after ourselves
}

InsertNth() is complex � you will want to make some drawings to think about your solution and afterwards, to check its correctness.

/*

A more general version of Push().

Given a list, an index 'n' in the range 0..length,

and a data element, add a new node to the list so

that it has the given index.
*/
void InsertNth(struct node** headRef, int index, int data) {
// your code...

6 � SortedInsert()

Write a SortedInsert() function which given a list that is sorted in increasing order, and a single node, inserts the node into the correct sorted position in the list. While Push() allocates a new node to add to the list, SortedInsert() takes an existing node, and just rearranges pointers to insert it into the list. There are many possible solutions to this problem.

void SortedInsert(struct node** headRef, struct node* newNode) {
// Your code...

7 � InsertSort()

Write an InsertSort() function which given a list, rearranges its nodes so they are sorted in increasing order. It should use SortedInsert().

// Given a list, change it to be in sorted order (using SortedInsert()).
void InsertSort(struct node** headRef) { // Your code

8 � Append()

Write an Append() function that takes two lists, 'a' and 'b', appends 'b' onto the end of 'a', and then sets 'b' to NULL (since it is now trailing off the end of 'a'). Here is a drawing of a sample call to Append(a, b) with the start state in gray and the end state in black. At the end of the call, the 'a' list is {1, 2, 3, 4}, and 'b' list is empty.

It turns out that both of the head pointers passed to Append(a, b) need to be reference parameters since they both may need to be changed. The second 'b' parameter is always set to NULL. When is 'a' changed? That case occurs when the 'a' list starts out empty. In that case, the 'a' head must be changed from NULL to point to the 'b' list. Before the call 'b' is {3, 4}. After the call, 'a' is {3, 4}.

// Append 'b' onto the end of 'a', and then set 'b' to NULL.
void Append(struct node** aRef, struct node** bRef) {
// Your code...

9 � FrontBackSplit()

Given a list, split it into two sublists � one for the front half, and one for the back half. If the number of elements is odd, the extra element should go in the front list. So FrontBackSplit() on the list {2, 3, 5, 7, 11} should yield the two lists {2, 3, 5} and {7, 11}. Getting this right for all the cases is harder than it looks. You should check your solution against a few cases (length = 2, length = 3, length=4) to make sure that the list gets split correctly near the short-list boundary conditions. If it works right for length=4, it probably works right for length=1000. You will probably need special case code to deal with the (length <2) cases.

Hint. Probably the simplest strategy is to compute the length of the list, then use a for loop to hop over the right number of nodes to find the last node of the front half, and then cut the list at that point. There is a trick technique that uses two pointers to traverse the list. A "slow" pointer advances one nodes at a time, while the "fast" pointer goes two nodes at a time. When the fast pointer reaches the end, the slow pointer will be about half way. For either strategy, care is required to split the list at the right point.

/*

Split the nodes of the given list into front and back halves,

and return the two lists using the reference parameters.

If the length is odd, the extra node should go in the front list.
*/
void FrontBackSplit(struct node* source,

struct node** frontRef, struct node** backRef) {
// Your code...

10 RemoveDuplicates()

Write a RemoveDuplicates() function which takes a list sorted in increasing order and deletes any duplicate nodes from the list. Ideally, the list should only be traversed once.

/*

Remove duplicates from a sorted list.
*/
void RemoveDuplicates(struct node* head) {
// Your code...

11 � MoveNode()

This is a variant on Push(). Instead of creating a new node and pushing it onto the given list, MoveNode() takes two lists, removes the front node from the second list and pushes it onto the front of the first. This turns out to be a handy utility function to have for several later problems. Both Push() and MoveNode() are designed around the feature that list operations work most naturally at the head of the list. Here's a simple example of what MoveNode() should do...

void MoveNodeTest() {
struct node* a = BuildOneTwoThree(); // the list {1, 2, 3}
struct node* b = BuildOneTwoThree();

MoveNode(&a, &b);
// a == {1, 1, 2, 3}
// b == {2, 3}

}

/*
Take the node from the front of the source, and move it to
the front of the dest.
It is an error to call this with the source list empty.

*/
void MoveNode(struct node** destRef, struct node** sourceRef) {
// Your code

12 � AlternatingSplit()

Write a function AlternatingSplit() that takes one list and divides up its nodes to make two smaller lists. The sublists should be made from alternating elements in the original list. So if the original list is {a, b, a, b, a}, then one sublist should be {a, a, a} and the other should be {b, b}. You may want to use MoveNode() as a helper. The elements in the new lists may be in any order (for some implementations, it turns out to be convenient if they are in the reverse order from the original list.)

/*

Given the source list, split its nodes into two shorter lists.

If we number the elements 0, 1, 2, ... then all the even elements

should go in the first list, and all the odd elements in the second.

The elements in the new lists may be in any order.
*/
void AlternatingSplit(struct node* source,

struct node** aRef, struct node** bRef) {
// Your code

13� ShuffleMerge()

Given two lists, merge their nodes together to make one list, taking nodes alternately between the two lists. So ShuffleMerge() with {1, 2, 3} and {7, 13, 1} should yield {1, 7, 2, 13, 3, 1}. If either list runs out, all the nodes should be taken from the other list. The solution depends on being able to move nodes to the end of a list as discussed in the Section 1 review. You may want to use MoveNode() as a helper. Overall, many techniques are possible: dummy node, local reference, or recursion. Using this function and FrontBackSplit(), you could simulate the shuffling of cards.

/*

Merge the nodes of the two lists into a single list taking a node

alternately from each list, and return the new list.
*/
struct node* ShuffleMerge(struct node* a, struct node* b) {
// Your code

14 � SortedMerge()

Write a SortedMerge() function that takes two lists, each of which is sorted in increasing order, and merges the two together into one list which is in increasing order. SortedMerge() should return the new list. The new list should be made by splicing together the nodes of the first two lists (use MoveNode()). Ideally, Merge() should only make one pass through each list. Merge() is tricky to get right � it may be solved iteratively or recursively. There are many cases to deal with: either 'a' or 'b' may be empty, during processing either 'a' or 'b' may run out first, and finally there's the problem of starting the result list empty, and building it up while going through 'a' and 'b'.

/*

Takes two lists sorted in increasing order, and

splices their nodes together to make one big

sorted list which is returned.
*/
struct node* SortedMerge(struct node* a, struct node* b) {
// your code...

15 � MergeSort()

(This problem requires recursion) Given FrontBackSplit() and SortedMerge(), it's pretty easy to write a classic recursive MergeSort(): split the list into two smaller lists, recursively sort those lists, and finally merge the two sorted lists together into a single sorted list. Ironically, this problem is easier than either FrontBackSplit() or SortedMerge().

void MergeSort(struct node* headRef) {
// Your code...

16 � SortedIntersect()

Given two lists sorted in increasing order, create and return a new list representing the intersection of the two lists. The new list should be made with its own memory � the original lists should not be changed. In other words, this should be Push() list building, not MoveNode(). Ideally, each list should only be traversed once. This problem along with Union() and Difference() form a family of clever algorithms that exploit the constraint that the lists are sorted to find common nodes efficiently.

/*

Compute a new sorted list that represents the intersection

of the two given sorted lists.
*/
struct node* SortedIntersect(struct node* a, struct node* b) {
// Your code

17 � Reverse()

Write an iterative Reverse() function that reverses a list by rearranging all the .next pointers and the head pointer. Ideally, Reverse() should only need to make one pass of the list. The iterative solution is moderately complex. It's not so difficult that it needs to be this late in the document, but it goes here so it can be next to #18 Recursive Reverse which is quite tricky. The efficient recursive solution is quite complex (see next problem). (A memory drawing and some hints for Reverse() are below.)

void ReverseTest() {
struct node* head;

head = BuildOneTwoThree();

Reverse(&head);

// head now points to the list {3, 2, 1}

DeleteList(&head); // clean up after ourselves
}

"Push" Reverse Hint

Iterate through the main list. Move each node to the front of the result list as you go. It's like doing a Push() operation with each node, except you use pointer re-arrangement on the existing node instead of allocating a new node. You can use MoveNode() to do most of the work, or hand code the pointer re-arrangement.

"3 Pointers" Hint

This strategy is not as good as the "Push" strategy, but it's the first one I thought of (thanks to Owen Astrachan for pointing out the better solution). Instead of running a single "current" pointer down the list, run three pointers (front, middle, back) down the list in order: front is on one node, middle is just behind it, and back in turn is one behind middle. Once the code to run the three pointers down the list is clear and tested in a drawing, add code to reverse the .nextpointer of the middle node during the iteration. Add code to take care of the empty list and to adjust the head pointer itself.

/*

Reverse the given linked list by changing its .next pointers and

its head pointer. Takes a pointer (reference) to the head pointer.
*/
void Reverse(struct node** headRef) {
// your code...

18 � RecursiveReverse()

(This problem is difficult and is only possible if you are familiar with recursion.) There is a short and efficient recursive solution to this problem. As before, the code should only make a single pass over the list. Doing it with multiple passes is easier but very slow, so here we insist on doing it in one pass.. Solving this problem requires a real understanding of pointer code and recursion.

/*

Recursively reverses the given linked list by changing its .next

pointers and its head pointer in one pass of the list.
*/
void RecursiveReverse(struct node** headRef) {
// your code...

The Tree-List Recursion Problem

Once you are done with these problems, see the best and most complex list recursion problem of all time: The great Tree-List-Recursion problem at http://cslibrary.stanford.edu/109/

Section 3 � Solutions

1 � Count() Solution

A straightforward iteration down the list � just like Length().

int Count(struct node* head, int searchFor) {
struct node* current = head;
int count = 0;

while (current != NULL) {
if (current->data == searchFor) count++;
current = current->next;

}

return count;
}

Alternately, the iteration may be coded with a forloop instead of a while...

int Count2(struct node* head, int searchFor) {
struct node* current;
int count = 0;

for (current = head; current != NULL; current = current->next) {
if (current->data == searchFor) count++;
}

return count;
}

2 � GetNth() Solution

Combine standard list iteration with the additional problem of counting over to find the right node. Off-by-one errors are common in this sort of code. Check it carefully against a simple case. If it's right for n=0, n=1, and n=2, it will probably be right for n=1000.

int GetNth(struct node* head, int index) {

struct node* current = head;

int count = 0; // the index of the node we're currently looking at

while (current != NULL) {
if (count == index) return(current->data);
count++;
current = current->next;

}
} assert(0); // if we get to this line, the caller was asking // for a non-existent element so we assert fail.

3 � DeleteList() Solution

Delete the whole list and set the head pointer to NULL. There is a slight complication inside the loop, since we need extract the .nextpointer before we delete the node, since after the delete it will be technically unavailable.

void DeleteList(struct node** headRef) {
struct node* current = *headRef; // deref headRef to get the real head
struct node* next;

while (current != NULL) {next = current->next; // note the next pointerfree(current); // delete the nodecurrent = next; // advance to the next node

}

*headRef = NULL; // Again, deref headRef to affect the real head back
// in the caller.
}

4 � Pop() Solution

Extract the data from the head node, delete the node, advance the head pointer to point at the next node in line. Uses a reference parameter since it changes the head pointer.

int Pop(struct node** headRef) {
struct node* head;
int result;

head = *headRef;
assert(head != NULL);

result = head->data; // pull out the data before the node is deleted

*headRef = head->next; // unlink the head node for the caller// Note the * -- uses a reference-pointer// just like Push() and DeleteList().

free(head); // free the head node

return(result); // don't forget to return the data from the link
}

5 � InsertNth() Solution

This code handles inserting at the very front as a special case. Otherwise, it works by running a current pointer to the node before where the new node should go. Uses a for loop to march the pointer forward. The exact bounds of the loop (the use of < vs <=, n vs. n-1) are always tricky � the best approach is to get the general structure of the iteration correct first, and then make a careful drawing of a couple test cases to adjust the n vs. n-1 cases to be correct. (The so called "OBOB" � Off By One Boundary cases.) The OBOB cases are always tricky and not that interesting. Write the correct basic structure and then use a test case to get the OBOB cases correct. Once the insertion point has been determined, this solution uses Push() to do the link in. Alternately, the 3-Step Link In code could be pasted here directly.

void InsertNth(struct node** headRef, int index, int data) {
// position 0 is a special case...
if (index == 0) Push(headRef, data);
else {

struct node* current = *headRef;
int i;

for (i=0; i<index-1; i++) {
assert(current != NULL); // if this fails, index was too big
current = current->next;

}

assert(current != NULL); // tricky: you have to check one last time

Push(&(current->next), data); // Tricky use of Push() -
// The pointer being pushed on is not
// in the stack. But actually this works
// fine -- Push() works for any node pointer.

}
}

6 � SortedInsert() Solution

The basic strategy is to iterate down the list looking for the place to insert the new node. That could be the end of the list, or a point just before a node which is larger than the new node. The three solutions presented handle the "head end" case in different ways...

// Uses special case code for the head end

void SortedInsert(struct node** headRef, struct node* newNode) {
// Special case for the head end
if (*headRef == NULL || (*headRef)->data >= newNode->data) {

newNode->next = *headRef;

*headRef = newNode;
}
else {

// Locate the node before the point of insertion
struct node* current = *headRef;
while (current->next!=NULL && current->next->data<newNode->data) {

current = current->next;
}
newNode->next = current->next;
current->next = newNode;

}
}

// Dummy node strategy for the head end

void SortedInsert2(struct node** headRef, struct node* newNode) {
struct node dummy;
struct node* current = &dummy;
dummy.next = *headRef;

while (current->next!=NULL && current->next->data<newNode->data) {
current = current->next;
}

newNode->next = current->next;
current->next = newNode;

*headRef = dummy.next;
}

// Local references strategy for the head end
void SortedInsert3(struct node** headRef, struct node* newNode) {
struct node** currentRef = headRef;

while (*currentRef!=NULL && (*currentRef)->data<newNode->data) {
currentRef = &((*currentRef)->next);
}

newNode->next = *currentRef; // Bug: this line used to have
// an incorrect (*currRef)->next
*currentRef = newNode;
}

7 � InsertSort() Solution

Start with an empty result list. Iterate through the source list and SortedInsert() each of its nodes into the result list. Be careful to note the .nextfield in each node before moving it into the result list.

// Given a list, change it to be in sorted order (using SortedInsert()).

void InsertSort(struct node** headRef) {struct node* result = NULL; // build the answer herestruct node* current = *headRef; // iterate over the original liststruct node* next;

while (current!=NULL) {
next = current->next; // tricky - note the next pointer before we change it
SortedInsert(&result, current);
current = next;

}

*headRef = result;
}

8 � Append() Solution

The case where the 'a' list is empty is a special case handled first � in that case the 'a' head pointer needs to be changed directly. Otherwise we iterate down the 'a' list until we find its last node with the test (current->next != NULL), and then tack on the 'b' list there. Finally, the original 'b' head is set to NULL. This code demonstrates extensive use of pointer reference parameters, and the common problem of needing to locate the last node in a list. (There is also a drawing of how Append() uses memory below.)

void Append(struct node** aRef, struct node** bRef) {
struct node* current;

if (*aRef == NULL) { // Special case if a is empty

*aRef = *bRef;

}

else { // Otherwise, find the end of a, and append b there

current = *aRef;

while (current->next != NULL) { // find the last node

current = current->next;

}

current->next = *bRef; // hang the b list off the last node
}

*bRef=NULL; // NULL the original b, since it has been appended above
}

Append() Test and Drawing

The following AppendTest() code calls Append() to join two lists. What does memory look like just before the call to Append() exits?

void AppendTest() {
struct node* a;
struct node* b;

// set a to {1, 2}
// set b to {3, 4}

Append(&a, &b);
}

As an example of how reference parameters work, note how reference parameters in Append() point back to the head pointers in AppendTest()...

Stack

AppendTest()

current

9 � FrontBackSplit() Solution

Two solutions are presented...

// Uses the "count the nodes" strategy
void FrontBackSplit(struct node* source,

struct node** frontRef, struct node** backRef) {

int len = Length(source);

int i;

struct node* current = source;

if (len < 2) {
*frontRef = source;
*backRef = NULL;

}

else {
int hopCount = (len-1)/2; //(figured these with a few drawings)
for (i = 0; i<hopCount; i++) {

current = current->next;
}

// Now cut at current
*frontRef = source;
*backRef = current->next;
current->next = NULL;

}
}

// Uses the fast/slow pointer strategy
void FrontBackSplit2(struct node* source,

struct node** frontRef, struct node** backRef) {
struct node* fast;
struct node* slow;

if (source==NULL || source->next==NULL) { // length < 2 cases
*frontRef = source;
*backRef = NULL;

}

else {
slow = source;
fast = source->next;

// Advance 'fast' two nodes, and advance 'slow' one node

while (fast != NULL) {
fast = fast->next;
if (fast != NULL) {

slow = slow->next;
fast = fast->next;
}
}

// 'slow' is before the midpoint in the list, so split it in two
// at that point.
*frontRef = source;
*backRef = slow->next;
slow->next = NULL;

}
}

10 � RemoveDuplicates() Solution

Since the list is sorted, we can proceed down the list and compare adjacent nodes. When adjacent nodes are the same, remove the second one. There's a tricky case where the node after the next node needs to be noted before the deletion.

// Remove duplicates from a sorted list
void RemoveDuplicates(struct node* head) {

struct node* current = head;

if (current == NULL) return; // do nothing if the list is empty

// Compare current node with next node
while(current->next!=NULL) {

if (current->data == current->next->data) {
struct node* nextNext = current->next->next;
free(current->next);
current->next = nextNext;

}
else {
current = current->next; // only advance if no deletion
}
}
}

11 � MoveNode() Solution

The MoveNode() code is most similar to the code for Push(). It's short � just changing a couple pointers � but it's complex. Make a drawing.

void MoveNode(struct node** destRef, struct node** sourceRef) {
struct node* newNode = *sourceRef; // the front source node
assert(newNode != NULL);

*sourceRef = newNode->next; // Advance the source pointer

newNode->next = *destRef; // Link the old dest off the new node*destRef = newNode; // Move dest to point to the new node}

12 � AlternatingSplit() Solution

The simplest approach iterates over the source list and use MoveNode() to pull nodes off the source and alternately put them on 'a' and b'. The only strange part is that the nodes will be in the reverse order that they occurred in the source list.

AlternatingSplit()

void AlternatingSplit(struct node* source,

struct node** aRef, struct node** bRef) {
struct node* a = NULL; // Split the nodes to these 'a' and 'b' lists
struct node* b = NULL;

struct node* current = source;

while (current != NULL) {
MoveNode(&a, &current); // Move a node to 'a'
if (current != NULL) {

MoveNode(&b, &current); // Move a node to 'b'

}
}
*aRef = a;
*bRef = b;

}

AlternatingSplit() Using Dummy Nodes

Here is an alternative approach which builds the sub-lists in the same order as the source list. The code uses a temporary dummy header nodes for the 'a' and 'b' lists as they are being built. Each sublist has a "tail" pointer which points to its current last node � that way new nodes can be appended to the end of each list easily. The dummy nodes give the tail pointers something to point to initially. The dummy nodes are efficient in this case because they are temporary and allocated in the stack. Alternately, the "local references" technique could be used to get rid of the dummy nodes (see Section 1 for more details).

void AlternatingSplit2(struct node* source,

struct node** aRef, struct node** bRef) {struct node aDummy;struct node* aTail = &aDummy; // points to the last node in 'a'struct node bDummy;struct node* bTail = &bDummy; // points to the last node in 'b'struct node* current = source;

aDummy.next = NULL;
bDummy.next = NULL;

while (current != NULL) {MoveNode(&(aTail->next), &current); // add at 'a' tailaTail = aTail->next; // advance the 'a' tailif (current != NULL) {

MoveNode(&(bTail->next), &current);
bTail = bTail->next;
}
}

*aRef = aDummy.next;
*bRef = bDummy.next;
}

13 SuffleMerge() Solution

There are four separate solutions included. See Section 1 for information on the various dummy node and reference techniques.

SuffleMerge() � Dummy Node Not Using MoveNode()

struct node* ShuffleMerge(struct node* a, struct node* b) {
struct node dummy;
struct node* tail = &dummy;
dummy.next = NULL;

while (1) {

if (a==NULL) { // empty list cases
tail->next = b;
break;

}

else if (b==NULL) {
tail->next = a;
break;

}

else { // common case: move two nodes to tail
tail->next = a;
tail = a;
a = a->next;

tail->next = b;
tail = b;
b = b->next;

}
}

return(dummy.next);
}

SuffleMerge() � Dummy Node Using MoveNode()

Basically the same as above, but use MoveNode().

struct node* ShuffleMerge(struct node* a, struct node* b) {
struct node dummy;
struct node* tail = &dummy;
dummy.next = NULL;

while (1) {

if (a==NULL) {
tail->next = b;
break;

}

else if (b==NULL) {
tail->next = a;
break;

}

else {
MoveNode(&(tail->next), &a);
tail = tail->next;
MoveNode(&(tail->next), &b);
tail = tail->next;

}
}

return(dummy.next);
}

SuffleMerge() � Local References

Uses a local reference to get rid of the dummy nodes entirely.

struct node* ShuffleMerge(struct node* a, struct node* b) {
struct node* result = NULL;
struct node** lastPtrRef = &result;

while (1) {

if (a==NULL) {
*lastPtrRef = b;
break;

}

else if (b==NULL) {
*lastPtrRef = a;
break;

}

else {
MoveNode(lastPtrRef, &a);
lastPtrRef = &((*lastPtrRef)->next);
MoveNode(lastPtrRef, &b);
lastPtrRef = &((*lastPtrRef)->next);

}
}

return(result);
}

SuffleMerge() � Recursive

The recursive solution is the most compact of all, but is probably not appropriate for production code since it uses stack space proportionate to the lengths of the lists.

struct node* ShuffleMerge(struct node* a, struct node* b) {
struct node* result;
struct node* recur;

if (a==NULL) return(b); // see if either list is empty
else if (b==NULL) return(a);
else {

// it turns out to be convenient to do the recursive call first -
// otherwise a->next and b->next need temporary storage.

recur = ShuffleMerge(a->next, b->next);

result = a; // one node from aa->next = b; // one from bb->next = recur; // then the restreturn(result);

}
}

14 � SortedMerge() Solution

SortedMerge() Using Dummy Nodes

The strategy here uses a temporary dummy node as the start of the result list. The pointer tailalways points to the last node in the result list, so appending new nodes is easy. The dummy node gives tailsomething to point to initially when the result list is empty. This dummy node is efficient, since it is only temporary, and it is allocated in the stack. The loop proceeds, removing one node from either 'a' or 'b', and adding it to tail. When we are done, the result is in dummy.next.

struct node* SortedMerge(struct node* a, struct node* b) {struct node dummy; // a dummy first node to hang the result onstruct node* tail = &dummy; // Points to the last result node --

// so tail->next is the place to add
// new nodes to the result.

dummy.next = NULL;

while (1) {

if (a == NULL) { // if either list runs out, use the other list
tail->next = b;
break;

}

else if (b == NULL) {
tail->next = a;
break;

}

if (a->data <= b->data) {

MoveNode(&(tail->next), &a);
}
else {

MoveNode(&(tail->next), &b);
}
tail = tail->next;

}

return(dummy.next);
}

SortedMerge() Using Local References

This solution is structurally very similar to the above, but it avoids using a dummy node. Instead, it maintains a struct node** pointer, lastPtrRef, that always points to the last pointer of the result list. This solves the same case that the dummy node did � dealing with the result list when it is empty. If you are trying to build up a list at its tail, either the dummy node or the struct node** "reference" strategy can be used (see Section 1 for details).

struct node* SortedMerge2(struct node* a, struct node* b) {
struct node* result = NULL;
struct node** lastPtrRef = &result; // point to the last result pointer

while (1) {

if (a==NULL) {
*lastPtrRef = b;
break;

}

else if (b==NULL) {
*lastPtrRef = a;
break;

}

if (a->data <= b->data) {

MoveNode(lastPtrRef, &a);
}
else {

MoveNode(lastPtrRef, &b);
}
lastPtrRef = &((*lastPtrRef)->next); // tricky: advance to point to

// the next ".next" field

}

return(result);
}

SortedMerge() Using Recursion

Merge() is one of those nice recursive problems where the recursive solution code is much cleaner than the iterative code. You probably wouldn't want to use the recursive version for production code however, because it will use stack space which is proportional to the length of the lists.

struct node* SortedMerge3(struct node* a, struct node* b) {
struct node* result = NULL;

// Base cases
if (a==NULL) return(b);
else if (b==NULL) return(a);

// Pick either a or b, and recur

if (a->data <= b->data) {
result = a;
result->next = SortedMerge3(a->next, b);

}

else {
result = b;
result->next = SortedMerge3(a, b->next);

}

return(result);
}

15 � MergeSort() Solution

The MergeSort strategy is: split into sublists, sort the sublists recursively, merge the two sorted lists together to form the answer.

void MergeSort(struct node** headRef) {
struct node* head = *headRef;
struct node* a;
struct node* b;

// Base case -- length 0 or 1
if ((head == NULL) || (head->next == NULL)) {
return;
}

FrontBackSplit(head, &a, &b); // Split head into 'a' and 'b' sublists
// We could just as well use AlternatingSplit()

MergeSort(&a); // Recursively sort the sublists
MergeSort(&b);

*headRef = SortedMerge(a, b); // answer = merge the two sorted lists together
}

(Extra for experts) Using recursive stack space proportional to the length of a list is not recommended. However, the recursion in this case is ok � it uses stack space which is proportional to the log of the length of the list. For a 1000 node list, the recursion will only go about 10 deep. For a 2000 node list, it will go 11 deep. If you think about it, you can see that doubling the size of the list only increases the depth by 1.

16 � SortedIntersect() Solution

The strategy is to advance up both lists and build the result list as we go. When the current point in both lists are the same, add a node to the result. Otherwise, advance whichever list is smaller. By exploiting the fact that both lists are sorted, we only traverse each list once. To build up the result list, both the dummy node and local reference strategy solutions are shown...

// This solution uses the temporary dummy to build up the result list
struct node* SortedIntersect(struct node* a, struct node* b) {

struct node dummy;

struct node* tail = &dummy;

dummy.next = NULL;

// Once one or the other list runs out -- we're done
while (a!=NULL && b!=NULL) {

if (a->data == b->data) {
Push((&tail->next), a->data);
tail = tail->next;
a = a->next;
b = b->next;

}
else if (a->data < b->data) { // advance the smaller list

a = a->next;
}
else {

b = b->next;
}
}

return(dummy.next);
}

// This solution uses the local reference

struct node* SortedIntersect2(struct node* a, struct node* b) {
struct node* result = NULL;
struct node** lastPtrRef = &result;

// Advance comparing the first nodes in both lists.
// When one or the other list runs out, we're done.
while (a!=NULL && b!=NULL) {

if (a->data == b->data) { // found a node for the intersection
Push(lastPtrRef, a->data);
lastPtrRef = &((*lastPtrRef)->next);
a=a->next;
b=b->next;

}
else if (a->data < b->data) { // advance the smaller list

a=a->next;
}
else {

b=b->next;
}
}

return(result);
}

17 � Reverse() Solution

This first solution uses the "Push" strategy with the pointer re-arrangement hand coded inside the loop. There's a slight trickyness in that it needs to save the value of the "current->next" pointer at the top of the loop since the body of the loop overwrites that pointer.

/*

Iterative list reverse.

Iterate through the list left-right.

Move/insert each node to the front of the result list -

like a Push of the node.
*/
static void Reverse(struct node** headRef) {

struct node* result = NULL;
struct node* current = *headRef;
struct node* next;

while (current != NULL) {
next = current->next; // tricky: note the next node

current->next = result; // move the node onto the result
result = current;

current = next;
}

*headRef = result;
}

Here's the variation on the above that uses MoveNode() to do the work...

static void Reverse2(struct node** headRef) {
struct node* result = NULL;
struct node* current = *headRef;

while (current != NULL) {
MoveNode(&result, &current);
}

*headRef = result;
}

Finally, here's the back-middle-front strategy...

// Reverses the given linked list by changing its .next pointers and
// its head pointer. Takes a pointer (reference) to the head pointer.
void Reverse(struct node** headRef) {

if (*headRef != NULL) { // special case: skip the empty list

/*
Plan for this loop: move three pointers: front, middle, back
down the list in order. Middle is the main pointer running
down the list. Front leads it and Back trails it.
For each step, reverse the middle pointer and then advance all
three to get the next node.

*/

struct node* middle = *headRef; // the main pointer

struct node* front = middle->next; // the two other pointers (NULL ok)
struct node* back = NULL;

while (1) {
middle->next = back; // fix the middle node

if (front == NULL) break; // test if done

back = middle; // advance the three pointers
middle = front;
front = front->next;

}

*headRef = middle; // fix the head pointer to point to the new front
}
}

18 � RecursiveReverse() Solution

Probably the hardest part is accepting the concept that the RecursiveReverse(&rest)does in fact reverse the rest. Then then there's a trick to getting the one front node all the way to the end of the list. Make a drwaing to see how the trick works.

void RecursiveReverse(struct node** headRef) {
struct node* first;
struct node* rest;

if (*headRef == NULL) return; // empty list base case

first = *headRef; // suppose first = {1, 2, 3}rest = first->next; // rest = {2, 3}

if (rest == NULL) return; // empty rest base case

RecursiveReverse(&rest); // Recursively reverse the smaller {2, 3} case
// after: rest = {3, 2}

first->next->next = first; // put the first elem on the end of the listfirst->next = NULL; // (tricky step -- make a drawing)

*headRef = rest; // fix the head pointer
}

The inefficient soluition is to reverse the last n-1 elements of the list, and then iterate all the way down to the new tail and put the old head node there. That solution is very slow compared to the above which gets the head node in the right place without extra iteration.

Appendix

Basic Utility Function Implementations

Here is the source code for the basic utility functions.

Length()

// Return the number of nodes in a list

int Length(struct node* head) {
int count = 0;
struct node* current = head;

while (current != NULL) {
count++;
current=current->next;

}

return(count);
}

Push()

// Given a reference (pointer to pointer) to the head
// of a list and an int, push a new node on the front of the list.
// Creates a new node with the int, links the list off the .next of the
// new node, and finally changes the head to point to the new node.
void Push(struct node** headRef, int newData) {

struct node* newNode =

(struct node*) malloc(sizeof(struct node)); // allocate nodenewNode->data = newData; // put in the datanewNode->next = (*headRef); // link the old list off the new node(*headRef) = newNode; // move the head to point to the new node

}

BuildOneTwoThree()

// Build and return the list {1, 2, 3}

struct node* BuildOneTwoThree() {struct node* head = NULL; // Start with the empty listPush(&head, 3); // Use Push() to add all the dataPush(&head, 2);Push(&head, 1);

return(head);
}

Оставьте свой комментарий !

Ваше имя:
Комментарий:
Оба поля являются обязательными

 Автор  Комментарий к данной статье
dhanushprasad
  Write test cases (possible input and outputs) for a function which takes a singly linked list as an input and returns nth node from back.
2013-07-27 19:13:39