Beej's Guide to Network Programming

Contents:

• What is a socket?
• Two Types of Internet Sockets
• Low level Nonsense and Network Theory
• structs--Know these, or aliens will destroy the planet!
• Convert the Natives!
• IP Addresses and How to Deal With Them
• socket()--Get the File Descriptor!
• bind()--What port am I on?
• connect()--Hey, you!
• listen()--Will somebody please call me?
• accept()--"Thank you for calling port 3490."
• send() and recv()--Talk to me, baby!
• sendto() and recvfrom()--Talk to me, DGRAM-style
• close() and shutdown()--Get outta my face!
• getpeername()--Who are you?
• gethostname()--Who am I?
• DNS--You say "whitehouse.gov", I say "198.137.240.100"
• Client-Server Background
• A Simple Stream Server
• A Simple Stream Client
• Datagram Sockets
• Blocking
• select()--Synchronous I/O Multiplexing. Cool!
• More references
• Disclaimer and Call for Help

Two Types of Internet Sockets

Один из них - это "Stream Sockets";другой - "Datagram Sockets", соответственно "SOCK_STREAM" и "SOCK_DGRAM". Datagram sockets - их еще называют "неприконнекченными сокетами"

Особенность Stream sockets в том , что если вы положите 2 байта и отправите их в порядке "1, 2", на другом конце они прийдут все в том же порядке "1, 2" .

Такое приложение как telnet использует stream sockets. HTTP protocol также использует stream sockets.

stream sockets используют протокол , названный "The Transmission Control Protocol", или "TCP" (see RFC-793 .) TCP гарантированно доставит ваши байтики куда надо .

Datagram sockets - ненадежный тип сокетов , потому что данные во время посыла могут быть по дороге утеряны или достигнуть пункта назначения не в том порядке .

Datagram sockets не используют TCP ; они пользуют "UDP" (see RFC-768.)

Datagram sockets ненадежны потому , что не устанавливается коннект , а просто посылаются данные . Пример использования Datagram sockets - tftp, bootp.

Low level Nonsense and Network Theory

Теперь пришло время поговорить о Data Encapsulation! Вначале , при создании пакета , мы прописываем его в хидере какого-нибудь протокола , например TFTP . После этого исходный хидер включается в спротокол следующего уровня - допустим UDP, затем в IP, и наконец на физическом уровне , в Ethernet. Когда другой компьютер получает пакет , он будет извлекаться в обратном порядке .

В мире сетей существует следующая модель :

• Application
• Presentation
• Session
• Transport
• Network
• Data Link
• Physical

structs

socket descriptor - это сцелочисленный тип :

    int
 

Несколько слов о сокращениях : NBO - это "Network Byte Order". HBO - это "Host Byte Order".

My First Struct(TM)--struct sockaddr. This structure holds socket address information for many types of sockets:

    struct sockaddr {
         unsigned short    sa_family;    /* address family, AF_xxx       */
         char              sa_data[14];  /* 14 bytes of protocol address */
     };
 

To deal with struct sockaddr, programmers created a parallel structure: struct sockaddr_in ("in" for "Internet".)

    struct sockaddr_in {
         short int          sin_family;  /* Address family               */
         unsigned short int sin_port;    /* Port number                  */
         struct in_addr     sin_addr;    /* Internet address             */
         unsigned char      sin_zero[8]; /* Same size as struct sockaddr */
     };
 

"But," you object, "how can the entire structure, struct in_addr sin_addr, be in Network Byte Order?" This question requires careful examination of the structure struct in_addr, one of the worst unions alive:

    /* Internet address (a structure for historical reasons) */
     struct in_addr {
         unsigned long s_addr;
     };
 

Convert the Natives!

All righty. There are two types that you can convert: short (two bytes) and long (four bytes). These functions work for the unsigned variations as well. Say you want to convert a short from Host Byte Order to Network Byte Order. Start with "h" for "host", follow it with "to", then "n" for "network", and "s" for "short": h-to-n-s, or htons() (read: "Host to Network Short").

It's almost too easy...

You can use every combination if "n", "h", "s", and "l" you want, not counting the really stupid ones. For example, there is NOT a stolh() ("Short to Long Host") function--not at this party, anyway. But there are:

• htons()--"Host to Network Short"
• htonl()--"Host to Network Long"
• ntohs()--"Network to Host Short"
• ntohl()--"Network to Host Long"

Now, you may think you're wising up to this. You might think, "What do I do if I have to change byte order on a char?" Then you might think, "Uh, never mind." You might also think that since your 68000 machine already uses network byte order, you don't have to call htonl() on your IP addresses. You would be right, BUT if you try to port to a machine that has reverse network byte order, your program will fail. Be portable! This is a Unix world! Remember: put your bytes in Network Order before you put them on the network.

A final point: why do sin_addr and sin_port need to be in Network Byte Order in a struct sockaddr_in, but sin_family does not? The answer: sin_addr and sin_port get encapsulated in the packet at the IP and UDP layers, respectively. Thus, they must be in Network Byte Order. However, the sin_family field is only used by the kernel to determine what type of address the structure contains, so it must be in Host Byte Order. Also, since sin_family does not get sent out on the network, it can be in Host Byte Order.

IP Addresses and How to Deal With Them

First, let's say you have a struct sockaddr_in ina, and you have an IP address "132.241.5.10" that you want to store into it. The function you want to use, inet_addr(), converts an IP address in numbers-and-dots notation into an unsigned long. The assignment can be made as follows:

    ina.sin_addr.s_addr = inet_addr("132.241.5.10");
 

Now, the above code snippet isn't very robust because there is no error checking. See, inet_addr() returns -1 on error. Remember binary numbers? (unsigned)-1 just happens to correspond to the IP address 255.255.255.255! That's the broadcast address! Wrongo. Remember to do your error checking properly.

All right, now you can convert string IP addresses to longs. What about the other way around? What if you have a struct in_addr and you want to print it in numbers-and-dots notation? In this case, you'll want to use the function inet_ntoa() ("ntoa" means "network to ascii") like this:

    printf("%s",inet_ntoa(ina.sin_addr));
 

    char *a1, *a2;
     .
     .
     a1 = inet_ntoa(ina1.sin_addr);  /* this is 198.92.129.1 */
     a2 = inet_ntoa(ina2.sin_addr);  /* this is 132.241.5.10 */
     printf("address 1: %s\n",a1);
     printf("address 2: %s\n",a2);
 

    address 1: 132.241.5.10
     address 2: 132.241.5.10
 

That's all on this topic for now. Later, you'll learn to convert a string like "whitehouse.gov" into its corresponding IP address (see DNS, below.)

socket()--Get the File Descriptor!

    #include <sys/types.h> 
     #include <sys/socket.h> 
 
     int socket(int domain, int type, int protocol);
 

socket() simply returns to you a socket descriptor that you can use in later system calls, or -1 on error. The global variable errno is set to the error's value (see the perror() man page.)

bind()--What port am I on?

Here is the synopsis for the bind() system call:

    #include <sys/types.h> 
     #include <sys/socket.h> 
 
     int bind(int sockfd, struct sockaddr *my_addr, int addrlen);
 

Whew. That's a bit to absorb in one chunk. Let's have an example:

    #include <string.h> 
     #include <sys/types.h> 
     #include <sys/socket.h> 
 
     #define MYPORT 3490
 
     main()
     {
         int sockfd;
         struct sockaddr_in my_addr;
 
         sockfd = socket(AF_INET, SOCK_STREAM, 0); /* do some error checking! */
 
         my_addr.sin_family = AF_INET;     /* host byte order */
         my_addr.sin_port = htons(MYPORT); /* short, network byte order */
         my_addr.sin_addr.s_addr = inet_addr("132.241.5.10");
         bzero(&(my_addr.sin_zero), 8);    /* zero the rest of the struct */
 
         /* don't forget your error checking for bind(): */
         bind(sockfd, (struct sockaddr *)&my_addr, sizeof(struct sockaddr));
         .
         .
         .
 

Lastly, on the topic of bind(), I should mention that some of the process of getting your own IP address and/or port can can be automated:

        my_addr.sin_port = 0; /* choose an unused port at random */
         my_addr.sin_addr.s_addr = INADDR_ANY;  /* use my IP address */
 

If you are into noticing little things, you might have seen that I didn't put INADDR_ANY into Network Byte Order! Naughty me. However, I have inside info: INADDR_ANY is really zero! Zero still has zero on bits even if you rearrange the bytes. However, purists will point out that there could be a parallel dimension where INADDR_ANY is, say, 12 and that my code won't work there. That's ok with me:

        my_addr.sin_port = htons(0); /* choose an unused port at random */
         my_addr.sin_addr.s_addr = htonl(INADDR_ANY);  /* use my IP address */
 

bind() also returns -1 on error and sets errno to the error's value.

Another thing to watch out for when calling bind(): don't go underboard with your port numbers. All ports below 1024 are RESERVED! You can have any port number above that, right up to 65535 (provided they aren't already being used by another program.)

One small extra final note about bind(): there are times when you won't absolutely have to call it. If you are connect()'ing to a remote machine and you don't care what your local port is (as is the case with telnet), you can simply call connect(), it'll check to see if the socket is unbound, and will bind() it to an unused local port.

connect()--Hey, you!

Lucky for you, program, you're now perusing the section on connect()--how to connect to a remote host. You read furiously onward, not wanting to disappoint your user...

The connect() call is as follows:

    #include <sys/types.h> 
     #include <sys/socket.h> 
 
     int connect(int sockfd, struct sockaddr *serv_addr, int addrlen);
 

Isn't this starting to make more sense? Let's have an example:

    #include <string.h> 
     #include <sys/types.h> 
     #include <sys/socket.h> 
 
     #define DEST_IP   "132.241.5.10"
     #define DEST_PORT 23
 
     main()
     {
         int sockfd;
         struct sockaddr_in dest_addr;   /* will hold the destination addr */
 
         sockfd = socket(AF_INET, SOCK_STREAM, 0); /* do some error checking! */
 
         dest_addr.sin_family = AF_INET;        /* host byte order */
         dest_addr.sin_port = htons(DEST_PORT); /* short, network byte order */
         dest_addr.sin_addr.s_addr = inet_addr(DEST_IP);
         bzero(&(dest_addr.sin_zero), 8);       /* zero the rest of the struct */
 
         /* don't forget to error check the connect()! */
         connect(sockfd, (struct sockaddr *)&dest_addr, sizeof(struct sockaddr));
         .
         .
         .
 

Again, be sure to check the return value from connect()--it'll return -1 on error and set the variable errno.

Also, notice that we didn't call bind(). Basically, we don't care about our local port number; we only care where we're going. The kernel will choose a local port for us, and the site we connect to will automatically get this information from us. No worries.

listen()--Will somebody please call me?

The listen call is fairly simple, but requires a bit of explanation:

    int listen(int sockfd, int backlog);
 

Again, as per usual, listen() returns -1 and sets errno on error.

Well, as you can probably imagine, we need to call bind() before we call listen() or the kernel will have us listening on a random port. Bleah! So if you're going to be listening for incoming connections, the sequence of system calls you'll make is:

    socket();
     bind();
     listen();
     /* accept() goes here */
 

accept()--"Thank you for calling port 3490."

The call is as follows:

     #include <sys/socket.h> 
 
      int accept(int sockfd, void *addr, int *addrlen);
 

Guess what? accept() returns -1 and sets errno if an error occurs. Betcha didn't figure that.

Like before, this is a bunch to absorb in one chunk, so here's a sample code fragment for your perusal:

    #include <string.h> 
     #include <sys/types.h> 
     #include <sys/socket.h> 
 
     #define MYPORT 3490    /* the port users will be connecting to */
 
     #define BACKLOG 10     /* how many pending connections queue will hold */
 
     main()
     {
         int sockfd, new_fd;  /* listen on sock_fd, new connection on new_fd */
         struct sockaddr_in my_addr;    /* my address information */
         struct sockaddr_in their_addr; /* connector's address information */
         int sin_size;
 
         sockfd = socket(AF_INET, SOCK_STREAM, 0); /* do some error checking! */
 
         my_addr.sin_family = AF_INET;         /* host byte order */
         my_addr.sin_port = htons(MYPORT);     /* short, network byte order */
         my_addr.sin_addr.s_addr = INADDR_ANY; /* auto-fill with my IP */
         bzero(&(my_addr.sin_zero), 8);        /* zero the rest of the struct */
 
         /* don't forget your error checking for these calls: */
         bind(sockfd, (struct sockaddr *)&my_addr, sizeof(struct sockaddr));
 
         listen(sockfd, BACKLOG);
 
         sin_size = sizeof(struct sockaddr_in);
         new_fd = accept(sockfd, &their_addr, &sin_size);
         .
         .
         .
 

send() and recv()--Talk to me, baby!

The send() call:

    int send(int sockfd, const void *msg, int len, int flags);
 

Some sample code might be:

    char *msg = "Beej was here!";
     int len, bytes_sent;
     .
     .
     len = strlen(msg);
     bytes_sent = send(sockfd, msg, len, 0);
     .
     .
     .
 

The recv() call is similar in many respects:

    int recv(int sockfd, void *buf, int len, unsigned int flags);
 

recv() returns the number of bytes actually read into the buffer, or -1 on error (with errno set, accordingly.)

There, that was easy, wasn't it? You can now pass data back and forth on stream sockets! Whee! You're a Unix Network Programmer!

sendto() and recvfrom()--Talk to me, DGRAM-style

Since datagram sockets aren't connected to a remote host, guess which piece of information we need to give before we send a packet? That's right! The destination address! Here's the scoop:

    int sendto(int sockfd, const void *msg, int len, unsigned int flags,
                const struct sockaddr *to, int tolen);
 

Just like with send(), sendto() returns the number of bytes actually sent (which, again, might be less than the number of bytes you told it to send!), or -1 on error.

Equally similar are recv() and recvfrom(). The synopsis of recvfrom() is:

    int recvfrom(int sockfd, void *buf, int len, unsigned int flags
                  struct sockaddr *from, int *fromlen);
 

recvfrom() returns the number of bytes received, or -1 on error (with errno set accordingly.)

Remember, if you connect() a datagram socket, you can then simply use send() and recv() for all your transactions. The socket itself is still a datagram socket and the packets still use UDP, but the socket interface will automatically add the destination and source information for you.

close() and shutdown()--Get outta my face!

    close(sockfd);
 

Just in case you want a little more control over how the socket closes, you can use the shutdown() function. It allows you to cut off communication in a certain direction, or both ways (just like close() does.) Synopsis:

    int shutdown(int sockfd, int how);
 

• 0 - Further receives are disallowed
• 1 - Further sends are disallowed
• 2 - Further sends and receives are disallowed (like close())

shutdown() returns 0 on success, and -1 on error (with errno set accordingly.)

If you deign to use shutdown() on unconnected datagram sockets, it will simply make the socket unavailable for further send() and recv() calls (remember that you can use these if you connect() your datagram socket.)

Nothing to it.

getpeername()--Who are you?

It's so easy, I almost didn't give it it's own section. But here it is anyway.

The function getpeername() will tell you who is at the other end of a connected stream socket. The synopsis:

    #include <sys/socket.h> 
 
     int getpeername(int sockfd, struct sockaddr *addr, int *addrlen);
 

The function returns -1 on error and sets errno accordingly.

Once you have their address, you can use inet_ntoa() or gethostbyaddr() to print or get more information. No, you can't get their login name. (Ok, ok. If the other computer is running an ident daemon, this is possible. This, however, is beyond the scope of this document. Check out RFC-1413 for more info.)

gethostname()--Who am I?

What could be more fun? I could think of a few things, but they don't pertain to socket programming. Anyway, here's the breakdown:

    #include <unistd.h>
 
     int gethostname(char *hostname, size_t size);
 

The arguments are simple: hostname is a pointer to an array of chars that will contain the hostname upon the function's return, and size is the length in bytes of the hostname array.

The function returns 0 on successful completion, and -1 on error, setting errno as usual.

DNS--You say "whitehouse.gov", I say "198.137.240.100"

    $ telnet whitehouse.gov
 

But how does it work? You'll be using the function gethostbyname():

    #include <netdb.h> 
     
     struct hostent *gethostbyname(const char *name);
 

    struct hostent {
         char    *h_name;
         char    **h_aliases;
         int     h_addrtype;
         int     h_length;
         char    **h_addr_list;
     };
     #define h_addr h_addr_list[0]
 

• h_name - Official name of the host.
• h_aliases - A NULL-terminated array of alternate names for the host.
• h_addrtype - The type of address being returned; usually AF_INET.
• h_length - The length of the address in bytes.
• h_addr_list - A zero-terminated array of network addresses for the host. Host addresses are in Network Byte Order.
• h_addr - The first address in h_addr_list.

gethostbyname() returns a pointer to the filled struct hostent, or NULL on error. (But errno is not set--h_errno is set instead. See herror(), below.)

But how is it used? Sometimes (as we find from reading computer manuals), just spewing the information at the reader is not enough. This function is certainly easier to use than it looks.

Here's an example program:

    #include <stdio.h> 
     #include <stdlib.h> 
     #include <errno.h> 
     #include <netdb.h> 
     #include <sys/types.h>
     #include <netinet/in.h> 
 
     int main(int argc, char *argv[])
     {
         struct hostent *h;
 
         if (argc != 2) {  /* error check the command line */
             fprintf(stderr,"usage: getip address\n");
             exit(1);
         }
 
         if ((h=gethostbyname(argv[1])) == NULL) {  /* get the host info */
             herror("gethostbyname");
             exit(1);
         }
 
         printf("Host name  : %s\n", h->h_name);
         printf("IP Address : %s\n",inet_ntoa(*((struct in_addr *)h->h_addr)));
 
         return 0;
     }
 

It's pretty straightforward. You simply pass the string that contains the machine name ("whitehouse.gov") to gethostbyname(), and then grab the information out of the returned struct hostent.

The only possible weirdness might be in the printing of the IP address, above. h->h_addr is a char *, but inet_ntoa() wants a struct in_addr passed to it. So I cast h->h_addr to a struct in_addr *, then dereference it to get at the data.

Client-Server Background

Figure 2. The Client-Server Relationship.

The exchange of information between client and server is summarized in Figure 2.

Note that the client-server pair can speak SOCK_STREAM, SOCK_DGRAM, or anything else (as long as they're speaking the same thing.) Some good examples of client-server pairs are telnet/telnetd, ftp/ftpd, or bootp/bootpd. Every time you use ftp, there's a remote program, ftpd, that serves you.

Often, there will only be one server on a machine, and that server will handle multiple clients using fork(). The basic routine is: server will wait for a connection, accept() it, and fork() a child process to handle it. This is what our sample server does in the next section.

A Simple Stream Server

    $ telnet remotehostname 3490
 

The server code: (Note: a trailing backslash on a line means that the line is continued on the next.)

    #include <stdio.h> 
     #include <stdlib.h> 
     #include <errno.h> 
     #include <string.h> 
     #include <sys/types.h> 
     #include <netinet/in.h> 
     #include <sys/socket.h> 
     #include <sys/wait.h> 
 
     #define MYPORT 3490    /* the port users will be connecting to */
 
     #define BACKLOG 10     /* how many pending connections queue will hold */
 
     main()
     {
         int sockfd, new_fd;  /* listen on sock_fd, new connection on new_fd */
         struct sockaddr_in my_addr;    /* my address information */
         struct sockaddr_in their_addr; /* connector's address information */
         int sin_size;
 
         if ((sockfd = socket(AF_INET, SOCK_STREAM, 0)) == -1) {
             perror("socket");
             exit(1);
         }
 
         my_addr.sin_family = AF_INET;         /* host byte order */
         my_addr.sin_port = htons(MYPORT);     /* short, network byte order */
         my_addr.sin_addr.s_addr = INADDR_ANY; /* auto-fill with my IP */
         bzero(&(my_addr.sin_zero), 8);        /* zero the rest of the struct */
 
         if (bind(sockfd, (struct sockaddr *)&my_addr, sizeof(struct sockaddr)) \
                                                                       == -1) {
             perror("bind");
             exit(1);
         }
 
         if (listen(sockfd, BACKLOG) == -1) {
             perror("listen");
             exit(1);
         }
 
         while(1) {  /* main accept() loop */
             sin_size = sizeof(struct sockaddr_in);
             if ((new_fd = accept(sockfd, (struct sockaddr *)&their_addr, \
                                                           &sin_size)) == -1) {
                 perror("accept");
                 continue;
             }
             printf("server: got connection from %s\n", \
                                                inet_ntoa(their_addr.sin_addr));
             if (!fork()) { /* this is the child process */
                 if (send(new_fd, "Hello, world!\n", 14, 0) == -1)
                     perror("send");
                 close(new_fd);
                 exit(0);
             }
             close(new_fd);  /* parent doesn't need this */
 
             while(waitpid(-1,NULL,WNOHANG) > 0); /* clean up child processes */
         }
     }
 

You can also get the string from this server by using the client listed in the next section.

A Simple Stream Client

The client source:

    #include <stdio.h> 
     #include <stdlib.h> 
     #include <errno.h> 
     #include <string.h> 
     #include <netdb.h> 
     #include <sys/types.h> 
     #include <netinet/in.h> 
     #include <sys/socket.h> 
 
     #define PORT 3490    /* the port client will be connecting to */
 
     #define MAXDATASIZE 100 /* max number of bytes we can get at once */
 
     int main(int argc, char *argv[])
     {
         int sockfd, numbytes;  
         char buf[MAXDATASIZE];
         struct hostent *he;
         struct sockaddr_in their_addr; /* connector's address information */
 
         if (argc != 2) {
             fprintf(stderr,"usage: client hostname\n");
             exit(1);
         }
 
         if ((he=gethostbyname(argv[1])) == NULL) {  /* get the host info */
             herror("gethostbyname");
             exit(1);
         }
 
         if ((sockfd = socket(AF_INET, SOCK_STREAM, 0)) == -1) {
             perror("socket");
             exit(1);
         }
 
         their_addr.sin_family = AF_INET;      /* host byte order */
         their_addr.sin_port = htons(PORT);    /* short, network byte order */
         their_addr.sin_addr = *((struct in_addr *)he->h_addr);
         bzero(&(their_addr.sin_zero), 8);     /* zero the rest of the struct */
 
         if (connect(sockfd, (struct sockaddr *)&their_addr, \
                                               sizeof(struct sockaddr)) == -1) {
             perror("connect");
             exit(1);
         }
 
         if ((numbytes=recv(sockfd, buf, MAXDATASIZE, 0)) == -1) {
             perror("recv");
             exit(1);
         }
 
         buf[numbytes] = '\0';
 
         printf("Received: %s",buf);
 
         close(sockfd);
 
         return 0;
     }
 

Notice that if you don't run the server before you run the client, connect() returns "Connection refused". Very useful.

Datagram Sockets

listener sits on a machine waiting for an incoming packet on port 4950. talker sends a packet to that port, on the specified machine, that contains whatever the user enters on the command line.

Here is the source for listener.c:

    #include <stdio.h> 
     #include <stdlib.h> 
     #include <errno.h> 
     #include <string.h> 
     #include <sys/types.h> 
     #include <netinet/in.h> 
     #include <sys/socket.h> 
     #include <sys/wait.h> 
 
     #define MYPORT 4950    /* the port users will be sending to */
 
     #define MAXBUFLEN 100
 
     main()
     {
         int sockfd;
         struct sockaddr_in my_addr;    /* my address information */
         struct sockaddr_in their_addr; /* connector's address information */
         int addr_len, numbytes;
         char buf[MAXBUFLEN];
 
         if ((sockfd = socket(AF_INET, SOCK_DGRAM, 0)) == -1) {
             perror("socket");
             exit(1);
         }
 
         my_addr.sin_family = AF_INET;         /* host byte order */
         my_addr.sin_port = htons(MYPORT);     /* short, network byte order */
         my_addr.sin_addr.s_addr = INADDR_ANY; /* auto-fill with my IP */
         bzero(&(my_addr.sin_zero), 8);        /* zero the rest of the struct */
 
         if (bind(sockfd, (struct sockaddr *)&my_addr, sizeof(struct sockaddr)) \
                                                                        == -1) {
             perror("bind");
             exit(1);
         }
 
         addr_len = sizeof(struct sockaddr);
         if ((numbytes=recvfrom(sockfd, buf, MAXBUFLEN, 0, \
                            (struct sockaddr *)&their_addr, &addr_len)) == -1) {
             perror("recvfrom");
             exit(1);
         }
 
         printf("got packet from %s\n",inet_ntoa(their_addr.sin_addr));
         printf("packet is %d bytes long\n",numbytes);
         buf[numbytes] = '\0';
         printf("packet contains \"%s\"\n",buf);
 
         close(sockfd);
     }
 

Next comes the source for talker.c:

    #include <stdio.h> 
     #include <stdlib.h> 
     #include <errno.h> 
     #include <string.h> 
     #include <sys/types.h> 
     #include <netinet/in.h> 
     #include <netdb.h> 
     #include <sys/socket.h> 
     #include <sys/wait.h> 
 
     #define MYPORT 4950    /* the port users will be sending to */
 
     int main(int argc, char *argv[])
     {
         int sockfd;
         struct sockaddr_in their_addr; /* connector's address information */
         struct hostent *he;
         int numbytes;
 
         if (argc != 3) {
             fprintf(stderr,"usage: talker hostname message\n");
             exit(1);
         }
 
         if ((he=gethostbyname(argv[1])) == NULL) {  /* get the host info */
             herror("gethostbyname");
             exit(1);
         }
 
         if ((sockfd = socket(AF_INET, SOCK_DGRAM, 0)) == -1) {
             perror("socket");
             exit(1);
         }
 
         their_addr.sin_family = AF_INET;      /* host byte order */
         their_addr.sin_port = htons(MYPORT);  /* short, network byte order */
         their_addr.sin_addr = *((struct in_addr *)he->h_addr);
         bzero(&(their_addr.sin_zero), 8);     /* zero the rest of the struct */
 
         if ((numbytes=sendto(sockfd, argv[2], strlen(argv[2]), 0, \
              (struct sockaddr *)&their_addr, sizeof(struct sockaddr))) == -1) {
             perror("sendto");
             exit(1);
         }
 
         printf("sent %d bytes to %s\n",numbytes,inet_ntoa(their_addr.sin_addr));
 
         close(sockfd);
 
         return 0;
     }
 

Except for one more tiny detail that I've mentioned many times in the past: connected datagram sockets. I need to talk about this here, since we're in the datagram section of the document. Let's say that talker calls connect() and specifies the listener's address. From that point on, talker may only sent to and receive from the address specified by connect(). For this reason, you don't have to use sendto() and recvfrom(); you can simply use send() and recv().

Blocking

Lots of functions block. accept() blocks. All the recv*() functions block. The reason they can do this is because they're allowed to. When you first create the socket descriptor with socket(), the kernel sets it to blocking. If you don't want a socket to be blocking, you have to make a call to fcntl():

    #include <unistd.h> 
     #include <fcntl.h> 
     .
     .
     sockfd = socket(AF_INET, SOCK_STREAM, 0);
     fcntl(sockfd, F_SETFL, O_NONBLOCK);
     .
     .
 

By setting a socket to non-blocking, you can effectively "poll" the socket for information. If you try to read from a non-blocking socket and there's no data there, it's not allowed to block--it will return -1 and errno will be set to EWOULDBLOCK.

Generally speaking, however, this type of polling is a bad idea. If you put your program in a busy-wait looking for data on the socket, you'll suck up CPU time like it was going out of style. A more elegant solution for checking to see if there's data waiting to be read comes in the following section on select().

select()--Synchronous I/O Multiplexing

No problem, you say, just an accept() and a couple of recv()s. Not so fast, buster! What if you're blocking on an accept() call? How are you going to recv() data at the same time? "Use non-blocking sockets!" No way! You don't want to be a CPU hog. What, then?

select() gives you the power to monitor several sockets at the same time. It'll tell you which ones are ready for reading, which are ready for writing, and which sockets have raised exceptions, if you really want to know that.

Without any further ado, I'll offer the synopsis of select():

       #include <sys/time.h> 
        #include <sys/types.h> 
        #include <unistd.h> 
 
        int select(int numfds, fd_set *readfds, fd_set *writefds,
                   fd_set *exceptfds, struct timeval *timeout);
 

The function monitors "sets" of file descriptors; in particular readfds, writefds, and exceptfds. If you want to see if you can read from standard input and some socket descriptor, sockfd, just add the file descriptors 0 and sockfd to the set readfds. The parameter numfds should be set to the values of the highest file descriptor plus one. In this example, it should be set to sockfd+1, since it is assuredly higher than standard input (0).

When select() returns, readfds will be modified to reflect which of the file descriptors you selected is ready for reading. You can test them with the macro FD_ISSET(), below.

Before progressing much further, I'll talk about how to manipulate these sets. Each set is of the type fd_set. The following macros operate on this type:

• FD_ZERO(fd_set *set) - clears a file descriptor set
• FD_SET(int fd, fd_set *set) - adds fd to the set
• FD_CLR(int fd, fd_set *set) - removes fd from the set
• FD_ISSET(int fd, fd_set *set) - tests to see if fd is in the set

Finally, what is this weirded out struct timeval? Well, sometimes you don't want to wait forever for someone to send you some data. Maybe every 96 seconds you want to print "Still Going..." to the terminal even though nothing has happened. This time structure allows you to specify a timeout period. If the time is exceeded and select() still hasn't found any ready file descriptors, it'll return so you can continue processing.

The struct timeval has the follow fields:

    struct timeval {
         int tv_sec;     /* seconds */
         int tv_usec;    /* microseconds */
     };
 

Yay! We have a microsecond resolution timer! Well, don't count on it. Standard Unix timeslice is 100 milliseconds, so you'll probably have to wait at least that long, no matter how small you set your struct timeval.

Other things of interest: If you set the fields in your struct timeval to 0, select() will timeout immediately, effectively polling all the file descriptors in your sets. If you set the parameter timeout to NULL, it will never timeout, and will wait until the first file descriptor is ready. Finally, if you don't care about waiting for a certain set, you can just set it to NULL in the call to select().

The following code snippet waits 2.5 seconds for something to appear on standard input:

       #include <sys/time.h> 
        #include <sys/types.h> 
        #include <unistd.h> 
 
        #define STDIN 0  /* file descriptor for standard input */
 
        main()
        {
            struct timeval tv;
            fd_set readfds;
 
            tv.tv_sec = 2;
            tv.tv_usec = 500000;
 
            FD_ZERO(&readfds);
            FD_SET(STDIN, &readfds);
 
            /* don't care about writefds and exceptfds: */
            select(STDIN+1, &readfds, NULL, NULL, &tv);
 
            if (FD_ISSET(STDIN, &readfds))
                printf("A key was pressed!\n");
            else
                printf("Timed out.\n");
        }
 

Now, some of you might think this is a great way to wait for data on a datagram socket--and you are right: it might be. Some Unices can use select in this manner, and some can't. You should see what your local man page says on the matter if you want to attempt it.

One final note of interest about select(): if you have a socket that is listen()'ing, you can check to see if there is a new connection by putting that socket's file descriptor in the readfds set.

And that, my friends, is a quick overview of the almighty select() function.

More References

Try the following man pages, for starters:

• socket()
• bind()
• connect()
• listen()
• accept()
• send()
• recv()
• sendto()
• recvfrom()
• close()
• shutdown()
• getpeername()
• getsockname()
• gethostbyname()
• gethostbyaddr()
• getprotobyname()
• fcntl()
• select()
• perror()

Also, look up the following books:

Internetworking with TCP/IP, volumes I-III by Douglas E. Comer and David L. Stevens. Published by Prentice Hall. Second edition ISBNs: 0-13-468505-9, 0-13-472242-6, 0-13-474222-2. There is a third edition of this set which covers IPv6 and IP over ATM.

Using C on the UNIX System by David A. Curry. Published by O'Reilly & Associates, Inc. ISBN 0-937175-23-4.

TCP/IP Network Administration by Craig Hunt. Published by O'Reilly & Associates, Inc. ISBN 0-937175-82-X.

TCP/IP Illustrated, volumes 1-3 by W. Richard Stevens and Gary R. Wright. Published by Addison Wesley. ISBNs: 0-201-63346-9, 0-201-63354-X, 0-201-63495-3.

Unix Network Programming by W. Richard Stevens. Published by Prentice Hall. ISBN 0-13-949876-1.

On the web:

BSD Sockets: A Quick And Dirty Primer
(http://www.cs.umn.edu/~bentlema/unix/--has other great Unix system programming info, too!)

Client-Server Computing
(http://pandonia.canberra.edu.au/ClientServer/socket.html)

Intro to TCP/IP (gopher)
(gopher://gopher-chem.ucdavis.edu/11/Index/Internet_aw/Intro_the_Internet/intro.to.ip/)

Internet Protocol Frequently Asked Questions (France)
(http://web.cnam.fr/Network/TCP-IP/)

The Unix Socket FAQ
(http://www.ibrado.com/sock-faq/)

Оставьте свой комментарий !
Ваше имя: Комментарий: Оба поля являются обязательными  Автор   Комментарий к данной статье